Product Specifications: DN15 (D20), DN20 (D25), DN25 (D32), DN32 (D40), DN40 (D5...
Common defects caused by insufficient heating time: 1. Incomplete fusion → Insufficient joint strength and easy leakage: Low temperature or insufficient heating time will cause the pipe wall and joint wall to not melt sufficiently, forming a "cold weld" or "false fusion". The joint is prone to micro-cracks and leakage ...
View More1. Rapid Assembly: Socket Fusion Fittings utilize a hot-melt socket welding process. Welding is completed simply by inserting the pipe into the sleeve and heating for tens of seconds. The overall operation time is significantly shorter than the minutes or even hours required for traditional arc or gas welding. 2. Low O...
View More1. High Temperature Resistance Taking fluoroplastics (PTFE, FEP, PVDF, ETFE, PFA) as an example, their maximum operating temperature can reach 260℃, with a low temperature limit above -18℃. Conventional plastic piping (such as PPR and PVC) can be used stably for a long time below 90℃, but softening or even failure will...
View More
Products
Company Information
Address: No. 55 Haichuan Road, High-Tech Zone, Dongtai City, Jiangsu Province, China
Mobile: +86 137 7009 5258
Tel: +86-515-85479999
Email: [email protected]
We'd love to hear from you!
English
中文简体